1) From the Start Menu select Settings.

2) Select the Connections TAB at the base of the screen.

3) Click on the Bluetooth Icon

4) Make sure Turn on Bluetooth and Make this device discoverable are both ticked. Then click on the Devices TAB at the bottom of the screen

5) Make sure your LM185 bluetooth adapater is plugged into your pat tester correctly and that the PAT Tester is switched on. You should see a slow blue flashing light on the LM185 adapater. On the PDA, click on the New Partnership... option

6) The PDA will now scan for new devices and after a while should find the LM185 Serial to Bluetooth adapter.

7) Click on the Serial Adapter listed and then select the Next button at the base of the screen.

8) Enter the PassKey for the LM185 which by default is set to 1234, then click on the Next button at the base of the screen.

9) Make sure you tick the Serial Port tick box to say that this is the service that you want to use on this bluetooth device. Then click on the Finish button at the base of the screen.

10) Click on New Outgoing Port

11) Click on Serial Adaptor

12) Change the com port from 0 to Com8 and tick the Secure Connection tick box and then click on the Finish Button at the base of the screen.